
What characteristics should be examined when comparing wire types? (Part 1 of 2)
Jul 6, 2022 | Elements of EDM, General, Wire
This is a great question that applies to both plain brass and coated wires. When comparing wires, several characteristics and attributes should be examined, especially when trying the first spool of a new wire brand or type. Price alone is not a good gauge. Depending on how often you buy different brands or types of wire, it may be beneficial to establish a few baseline evaluation...
What’s the best way to create a 4-Axis program to ensure the best accuracy and eliminate wire lines and facetted geometry?
Jun 22, 2022 | Elements of EDM, General, Wire
This question hits on many areas that relate to the machine as well as CAM system programming...
What is the proper programming format for a tapered or 4-axis profile that requires the manual wire threading of an angular start hole on a wire EDM machine?
Angular start holes commonly occur when machining mold tooling lifter pockets and ejector pin...
Can the same electrode reduction undersize amount be used for all electrodes?
Apr 20, 2022 | Elements of EDM, General
A proper answer requires a detailed look at the overall EDM operation. The practice of using a...
Can I use graphite or copper-graphite electrode materials to machine tungsten-carbide?
While graphite materials can be used to machine carbide materials, it is not the best method. One...
Is there an easy way to test the condition of my sinker dielectric oil?
Mar 23, 2022 | Elements of EDM, General
Depending on the fluid’s type, make and age, the easiest way to check the condition of your sinker...
What does a Wire EDM machine require for regular maintenance?
Mar 9, 2022 | General
Wire EDM is a versatile and useful machining process. One of the prerequisites for repeatability,...
What are the best cleaners to maintain my Wire EDM machine?
Feb 23, 2022 | Elements of EDM, General, Wire
Proper maintenance and cleaning of Wire EDM equipment is key to achieve reliable and repeatable...
What are the most effective methods of holding and retaining slugs?
Feb 9, 2022 | General
There are several different techniques for holding and retaining slugs that will vary based upon...
Common electrode materials for electrical discharge machining in a sinker EDM with oil-based dielectric
Jun 18, 2021 | Elements of EDM, Sinker
When choosing an electrode material, you must consider many factors. The usual first decision is,...
The Beginning of Ram Type EDM (Sinker)
Jun 3, 2021 | Elements of EDM, Sinker
Ram type (also called sinker type) EDM was the first type of Electrical Discharge Machining used...
TOP ARTICLES
What characteristics should be examined when comparing wire types? (Part 1 of 2)
Jul 6, 2022 | Elements of EDM, General, Wire
What’s the best way to create a 4-Axis program to ensure the best accuracy and eliminate wire lines and facetted geometry?
Jun 22, 2022 | Elements of EDM, General, Wire
What is the proper programming format for a tapered or 4-axis profile that requires the manual wire threading of an angular start hole on a wire EDM machine?
Can the same electrode reduction undersize amount be used for all electrodes?
Apr 20, 2022 | Elements of EDM, General
Can I use graphite or copper-graphite electrode materials to machine tungsten-carbide?
Is there an easy way to test the condition of my sinker dielectric oil?
Mar 23, 2022 | Elements of EDM, General
What does a Wire EDM machine require for regular maintenance?
Mar 9, 2022 | General
What are the best cleaners to maintain my Wire EDM machine?
Feb 23, 2022 | Elements of EDM, General, Wire
What are the most effective methods of holding and retaining slugs?
Feb 9, 2022 | General
Common electrode materials for electrical discharge machining in a sinker EDM with oil-based dielectric
Jun 18, 2021 | Elements of EDM, Sinker
CATEGORIES